LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 631 (Body Rear End) >> Repair Instructions >> Lid Replacement - Cargo Box Stowage Box (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cargo Box Stowage Box Lid (Avalanche)
    GM741586Courtesy of GENERAL MOTORS CORP.
  1. Install the cargo box stowage lid to the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts (1) to the cargo box stowage lid.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Install the bolt (2) inside the cargo box stowage lid assembly.

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  4. Install the cargo box bridge side inner panel. Refer to PANEL REPLACEMENT - CARGO BOX BRIDGE SIDE INNER (AVALANCHE/EXT) .
  5. Install the assist handle. Refer to Assist Handle Replacement - Endgate (Avalanche) .
  6. Install the rear compartment cover assembly.
  7. Close the end gate.
scientia non olet · About LEMON Manuals