Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the hinge to the vehicle.
- Install the four retaining nuts.
Tighten: Tighten the nuts to 25 N.m (18 lb ft).
- Install the hinge trim cover (1) by pressing into place.
- Fold the rear seat back up.
NOTE:
Refer to FASTENER NOTICE
.