LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 630 (Wiring Systems (General Information)) >> Repair Instructions >> Instrument Panel Electrical Center or Junction Block Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to BATTERY DISCONNECT CAUTION .
  1. Disconnect the negative battery cable(s).
  2. Remove the left side end panel.
  3. Fig 1: Instrument Panel Electrical Center Or Junction Block
    G01696399Courtesy of GENERAL MOTORS CORP.
  4. Press on the clips on the top and the bottom in order to remove the fuse block from the instrument panel (IP) assembly.
  5. Disconnect all wiring connectors from the fuse block.
  6. Remove the fuse block from the vehicle.