LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Release Handle Assembly >> Installation

Park Brake Release Handle Assembly: Installation

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the release handle and the cable to the vehicle. Install the cable using the same routing as the original cable. Install the release handle to the instrument panel retainer.
  2. Install the park brake release lever handle mounting bolt and tighten to specifications. See TORQUE SPECIFICATIONS  .
  3. Connect the cable to the retainer on the brake lever. Connect the release cable to the lever.
scientia non olet · About LEMON Manuals