LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - No. 2 Rear (Bench) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the buckles to the seat frame.
    NOTE: Refer to FASTENER NOTICE .
    Fig 1: View Of No. 2 Rear Seat Belt Buckle Assembly & Bolts (Bench)
    GM841692Courtesy of GENERAL MOTORS CORP.
  2. Install the bolt (1) to the buckle assembly.

    Tighten:  Tighten the bolt to 53 N.m (39 lb in).

  3. 3. Install the seat cushion cover. Refer to SEAT CUSHION COVER AND PAD REPLACEMENT - REAR (60/40 - 50/50 SPLIT) or SEAT CUSHION COVER AND PAD REPLACEMENT - REAR (BENCH) .
scientia non olet · About LEMON Manuals