Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the buckle assembly to the rear seat.
- Install the bolt (1) that retains the buckle assembly to the seat frame.NOTE: Refer to FASTENER NOTICE .
Tighten: Tighten the nut to 52 N.m (38 lb ft).
- Fold the rear seat to the closed position.