LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 622 (Propeller Shaft And Universal Joints) >> Repair Instructions >> Propeller Shaft Replacement - One Piece >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, 2002 Chevrolet Cab & Chassis Silverado, and 2001 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the splines of the slip yoke for a sufficient coating of grease. If the splines of the slip yoke does not have a sufficient coating of grease, lubricate the shaft with grease, GM P/N 12345879 or equivalent, RWD w/Automatic Transmission Only.
  2. Install the propeller shaft into the transmission or transfer case. Align the reference marks made during removal.
  3. Install the propeller shaft (3) to the rear axle pinion yoke (4). Align the reference marks made during removal.
  4. Install the yoke retainers (2) and bolts (1). Tighten the yoke retainer bolts to 25 N.m (18 lb ft).
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals