LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Power Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat (Power) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power lumbar assembly to the seat back frame.
  2. Secure the power lumbar assembly by snapping the retainers onto the bar at the bottom of the seat back frame.
  3. Connect the power lumbar electrical connectors.
  4. Install the seat back cover. Refer to Seat Back Cover And Pad Replacement - Front  .
  5. Install the seat cushion. Refer to Seat Cushion Replacement - Front  .
  6. Enable the SIR system. Refer to ACTIVATING SYSTEM in SIR.
    Fig 1: Identifying Lumbar Assembly
    G01803906Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals