Temperature Regulation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

The heated seat system is designed to warm the seat cushion and seat back to approximately 42°C (107.6°F) when in the high heat position, and 37°C (98.6°F) when in the low heat position. The heated seat module monitors the seat temperature through the temperature sensor signal circuit and the temperature sensor (thermistor) that is located in the seat cushion. The temperature sensor is a variable resistor, it's resistance changes as the temperature of the seat changes. When the temperature sensor resistance indicates to the heated seat module that the seat has reached the desired temperature, the module opens the ground path of the heated seat elements through the heated seat element control circuit. The module will then cycle the element control circuit open and closed in order to maintain the desired temperature.