Removal Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fasteners securing the closeout insulator panel (3) to the instrument panel retainer.
- Remove the push in retainer in order to release the closeout insulator panel from the IP retainer.
- Turn the heater temperature sensor (2) 1/4 counter clockwise in order to remove the sensor from the closeout insulator panel (3).
- Disconnect the electrical connector (1) from the lower IP courtesy lamp.
- Slide the closeout insulator panel rearward in order to remove from the vehicle.