LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 608 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Knee Bolster Replacement (Non-Luxury) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the IP cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
    2. Fig 1: Removing Trim Plate Bezel (Non-Luxury)
    G01697227Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster screws.
  3. Unsnap the top of the knee bolster from the IP assembly.
    4. Fig 2: Locating Knee Bolster Screws (Non-Luxury)
    G01697228Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals