Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the console storage bin to the console.NOTE: Refer to FASTENER NOTICE .
- Install the 2 retaining bin screws. Tighten the screws to 2 N.m (18 lbs in).
- Install the rear cupholder by pushing the unit in until the cupholder locks into place.
- Install the 4 bolts retaining the console to the bracket. Tighten the bolts to 2 N.m (18 lbs in).
- Install the bin screws. Tighten the screws to 2 N.m (18 lbs in).
- Close the console.