LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 608 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Console Replacement (Luxury Console) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET .
  2. Remove the console bezel. Refer to Bezel Replacement - Floor Console (Luxury) .
  3. Remove the two bolts (1) attaching the floor console to the front extension.
  4. Remove the bolt (2) attaching the floor console to the subwoofer box, if equipped.
  5. Lift up the console assembly from the floor studs and move rearwards to gain access to the wire harness connector.
  6. Fig 1: Locating Floor Console Retaining Bolts
    G01697331Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the wire connector.
  8. Remove the console assembly (3) from the vehicle.