LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 597 (Engine Mechanical - 4.0L (Unit Repair)) >> Repair Instructions >> Crankshaft and Bearings Installation >> Crankshaft Installation Procedure

Crankshaft Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the crankshaft sprocket drive pin (1).
    Fig 1: Installing Crankshaft Sprocket Drive Pin
    G01817208Courtesy of GENERAL MOTORS CORP.
  2. Ensure pin height (1) is 1.75-3.25 mm (0.0689-0.1280 in).
    Fig 2: Identifying Pin Height
    G01817209Courtesy of GENERAL MOTORS CORP.
  3. Gently lower the crankshaft into position in the cylinder block.
  4. Make sure the crankshaft turns without binding or noise.
    Fig 3: Installing Crankshaft
    G01817210Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals