Camshaft Cover Disassemble
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left camshaft cover gasket.
- Remove the left spark plug port seals.
- Remove the left ignition module ground/RFI spring port seal.
- Remove the right camshaft cover gasket.
- Remove the right spark plug port seals.
- Remove the right ignition module ground/RFI spring port seal.
- Remove the camshaft cover bolts.
- Remove the camshaft cover bolt grommets.