Tools Required

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

J 42038 Camshaft Holding Fixture

CAUTION: Refer to in FASTENER NOTICE .

Install new spark plugs.
Tighten

Tighten the spark plugs to 20 N.m (15 ft lbs).

Fig 1: Installing New Spark Plugs
Courtesy of GENERAL MOTORS CORP.
Remove the J 42038 from the rear of the cylinder head.
Wipe the cylinder head sealing surface with a clean, lint-free cloth.

Fig 2: Identifying J 42038
Courtesy of GENERAL MOTORS CORP.
Place the camshaft cover in position on the cylinder head.
Install the camshaft cover bolts.
Tighten

Tighten the camshaft cover bolts to 9 N.m (80 in lbs).

Fig 3: Installing Camshaft Cover
Courtesy of GENERAL MOTORS CORP.