LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Engine Mechanical - 3.5L (Unit Repair)) >> Repair Instructions >> Balance Shaft Cover Removal

Balance Shaft Cover Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the balance shaft cover bolts.
  2. Lift the balance shaft cover from the engine valley.
  3. Remove the balance shaft cover gasket. Carefully scrape any remaining gasket material from the cylinder block and balance shaft cover.
    Fig 1: Removing Balance Shaft Cover
    G01815141Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals