Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outer tie rod end to the inner tie rod.
- Install the outer tie rod end to the steering knuckle.
- Install the outer tie rod end retaining nut to the steering knuckle. Tighten the nut to 55 N.m (40 ft lbs).
- Install the outer tie rod end retaining bracket (2). Tighten the retaining bolts to 65 N.m (48 ft lbs).
- Install the tire and wheel.
- Perform a four wheel alignment. Refer to SPECIFICATIONS .
- Tighten the tie rod jam nut. Tighten the nut to 65 N.m (48 ft lbs).