LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Steering Wheel And Steering Column) >> Repair Instructions >> Horn Switch Replacement - On Vehicle >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the horn switch (2) to the steering wheel (3).
  2. Connect the horn contact plate (2) captured screws (1,4) to the steering wheel (3). Tighten the horn contact plate captured screws to 5.5 N.m (50 lb in).
  3. Install the horn plunger to the steering column.
  4. Install the inflator module. Refer to AIR BAG MODULES .
  5. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
scientia non olet · About LEMON Manuals