LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 592 (Power Steering System) >> Repair Instructions >> Stub Shaft Housing Replacement (680 Gear) >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Grease the stub shaft seal with the special grease supplied with the new stub shaft housing.
  2. Install the new stub shaft housing O-rings (1) (2).
  3. Install the stub shaft housing (3) onto the steering gear.
  4. Install the stub shaft housing bolts (4) into the stub shaft housing (34). Tighten the bolts to 55.0-70.0 N.m (40.5-51.6 ft lbs).
scientia non olet · About LEMON Manuals