LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 592 (Power Steering System) >> Repair Instructions >> Steering Gear Pitman Shaft & Housing Cover Replacement - Off Vehicle (670 Gear) >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new pitman shaft cover O-ring (4).
  2. Install the pitman shaft and cover assembly (3) onto the steering gear housing assembly
  3. Install the lash adjuster nut (2) onto the pitman shaft and cover assembly (3)
  4. Install the pitman shaft cover bolts (1) onto the pitman shaft and cover assembly (3). Tighten the pitman shaft cover bolts to 62 N.m (46 ft lbs).
  5. Install the lock washer (2).
  6. Install the nut (3).
  7. If necessary adjust the pitman shaft. Refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear) .
scientia non olet · About LEMON Manuals