Assembly Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the cylinder lines (1) for the following items:
- Cracks
- Dents
- Damage to the threads
- Replace the parts as needed.
- Install the new O-ring seals (1) to the valve end of the cylinder lines.
- Install the cylinder line assemblies (1) to the gear assembly (2).
- Tighten the valve end fittings to 16.9 N.m (12.6 ft lbs)
- Tighten the cylinder end fittings to 27 N.m (20 ft lbs)