Removal Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Place a drain pan under the pump.
- Remove the power steering pulley. Refer to Power Steering Pulley Replacement .
- Remove the pressure and return hoses from the pump.
- Remove the nut from the rear of the pump.
- Remove the retaining bolts from the front of the pump.
- Remove the accessory mounting bracket mounting bolts and nut.
- Pull the accessory mounting bracket forward.
- Remove the pump from the vehicle.