Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Important: In order to install the rocker panel molding to the retaining channel, pull the lower portion of the rocker panel molding away from the vehicle.
- Install the rocker panel molding to the vehicle.
Important: Press the rocker panel molding completely into the channel in order to remove any air gaps.
- Install the push pin retainers. Gently push up on the rocker panel molding until the rocker panel molding is flush with the metal retaining channel.