Park Brake Cable (Rear Disc): Installation
WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Position the park brake cable into the support bracket and install the cable retaining pin. Install the park brake cable to the actuator lever.
- Connect the retainer that holds the cable to the support bracket. Connect the rear cable to the front cable.
- For the right rear cable, connect the cable to the clip. For the left rear cable, install the equalizer stud to the equalizer nut, which is part of the equalizer assembly.
- Adjust the park brake. See DISC PARK BRAKE ADJUSTMENT or DRUM PARK BRAKE ADJUSTMENT under PARK BRAKE in ADJUSTMENTS & INSPECTIONS.
- Lower the vehicle.