Brake Pedal Assembly: Installation
WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Install the brake pedal and bushings. See Figure . Install the brake pedal nut and bolt. Tighten to specifications. See TORQUE SPECIFICATIONS .
- Install the brake pedal washer and pushrod to the brake pedal.
- Install the brake pedal pushrod retaining clip to the brake pedal.
- Install the wiring harness clips to the bracket.
- Install the cruise control release switch, if equipped.
- Install the stoplight switch. See STOPLIGHT SWITCH .
- Reposition and install the Body Control Module (BCM) into the retaining bracket.
- Install the left instrument panel insulator.