Installation Procedure
WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new O-ring (3), the spring and the PCV valve (2).
- Install the PCV valve access cover (1).
- While holding down on the PCV valve access cover, install the access cover bolts.
Tighten:
Tighten the bolts to 10 N.m (89 lb in)
- Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L67)