Removal Procedure
WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36)
- Disconnect the MAP sensor electrical connector.
- Remove the MAP sensor (1).
- Use a 16 mm (5/8 in) socket to press the access cover (2) down and rotate 1/4 turn counterclockwise.
- Remove the access cover.
- Remove the PCV valve (3) and the O-ring (4) from the intake manifold.