LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 550 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement (15/25 Series) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the stabilizer shaft link nut from the ball stud. See Fig 1.
    Fig 1: Removing Stabilizer Shaft Link Nut From Ball
    G00388760Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft insulator bracket mounting bolts. See Fig 2.
  4. Remove the stabilizer shaft.
  5. Remove the stabilizer shaft insulators brackets.
  6. Remove the stabilizer shaft insulators.
    Fig 2: Removing Stabilizer Shaft Insulators
    G00388761Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals