LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Engine Mechanical - 2.2L) >> Removal And Installation >> Unit Repair Disassembly >> Lower Crankcase (Unit Repair) Removal >> Removal

Lower Crankcase (Unit Repair) Removal: Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove crankshaft position sensor. Inspect position sensor for damage. Replace if necessary.
  2. Remove bedplate perimeter bolts.
  3. Remove crankshaft bearing bolts and discard.
  4. Using the pry-points and an appropriate prying tool, gently separate the upper and lower crankcase.
    Fig 1: Removing Bedplate Perimeter Bolts
    G01039537Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals