LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Rear Suspension System) >> Repair Instructions >> Wheel Bearing/Hub (Rear) >> Installation

Wheel Bearing/Hub (Rear): Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake actuator to the rear wheel bearing/hub. See PARK BRAKE ACTUATOR .
  2. Install the wheel bearing/hub and park brake assembly to the knuckle. See Figure.
  3. Install the wheel bearing/hub-to-knuckle bolts. Tighten the bolts to 75 N.m (55 lb ft).
  4. Install the park brake cable to the park brake actuator. See PARK BRAKE CABLE .
  5. Install the ABS electrical connector to the wheel speed sensor, if equipped. See Figure.
  6. Install the brake rotor. See REAR BRAKE ROTOR .
  7. Install the tires and wheels.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals