LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Rear Suspension System) >> Repair Instructions >> Rear Wheel Bearing/Hub Replacement (AWD - Disc) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel.
  3. Remove the knuckle.
  4. Remove the wheel bearing/hub assembly knuckle bolts (1).
    Fig 1: Removing Wheel Bearing/Hub Assembly
    G00357852Courtesy of GENERAL MOTORS CORP.
  5. Remove the wheel bearing/hub assembly (1) from the knuckle (2).
    Fig 2: Removing Wheel Bearing/Hub Assembly From Knuckle
    G00357853Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals