Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Support the rear axle.
- Disconnect automatic level control air lines from shock absorber, if equipped.
- Remove the shock absorber upper mounting bolt.
- Remove the shock absorber lower mounting bolt.
- Remove the shock absorber lower mounting bolt (4-door Utility models only).
- Remove the absorber.