Toe Link Replacement: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Install the toe link to the support assembly.
NOTE:
- Install the bolt with the head towards the front of the vehicle.
- Position the cam nut in same position as in the upper control arm.
Install the toe link to support nut and bolt.
NOTE: Refer to FASTENER NOTICE .
Install the toe link to the knuckle. Tighten the bolt to 160 N.m (118 lb ft).
Tighten the toe link to support bolt. Tighten the bolt to 95 N.m (70 lb ft).
Lower the vehicle.
Check the rear alignment.
- For 2003 models, refer to SPECIFICATIONS .
- For 2004 models, refer to SPECIFICATIONS .