LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 526 (Engine Mechanical - Overhaul - (LF, L3)) >> Timing Chain Assembly >> Camshaft Sprocket, Variable Valve Timing Actuator (L3) Assembly Note

Camshaft Sprocket, Variable Valve Timing Actuator (L3) Assembly Note

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the camshaft using a suitable wrench on the cast hexagon as shown in the figure.
  2. Tighten the camshaft sprocket lock bolt.

    Tightening Torque 

    1. 69-75 N.m {7.1-7.6 kgf.m, 50.9-55.3 ft.lbf} 
      Fig 1: Tightening Camshaft Sprocket Lock Bolt
      G02831665Courtesy of MAZDA MOTORS CORP.

scientia non olet · About LEMON Manuals