Cylinder Head Bolt Assembly Note

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.

Tighten the cylinder head bolts in the order indicated in the figure in 5 steps using the SST (49 D032 316) .
Tightening Torque
1. (1) 3-11 N.m {30.6-112 kgf.cm, 26.6-97.3 in.lbf}
2. (2) 13-17 N.m {1.4-1.7 kgf.m, 9.6-12.5 ft.lbf}
3. (3) 43-47 N.m {4.4-4.7 kgf.m, 31.8-34.6 ft.lbf}
4. (4) 88°-92°
5. (5) 88°-92°
  
  Fig 1: Cylinder Head Bolt Tightening Sequence
  Courtesy of MAZDA MOTORS CORP.