Drive Plate (ATX), Flywheel (MTX) Assembly Note
WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
- Hold the crankshaft using the SST .
- Tighten the bolts in the 3 steps in the figure.
Tightening Torque
- (1) 46-54 N.m {4.70-5.50 kgf.m, 34.0-39.8 ft.lbf}
- (2) 76-84 N.m {7.75-8.56 kgf.m, 56.1-61.9 ft.lbf}
- (3) 108-116 N.m {11.1-11.8 kgf.m, 79.7-85.5 ft.lbf}