LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Disc Brake Hardware >> Removal (Front)

Removal (Front)

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake caliper from the mounting bracket and support the brake caliper with heavy mechanic's wire, or equivalent. Discard the old caliper pin bolts, new bolts are supplied in the hardware kit. It is not necessary to disconnect the hydraulic brake flexible hose from the caliper.
  2. Remove the brake pads from the brake caliper bracket. Remove the brake pad retainers from the brake caliper bracket.
    3. NOTE: Wipe the old grease from the caliper pin bolts with a clean shop towel.
  3. Remove the brake caliper bracket. Mount the brake caliper bracket in a vise. Using a flat bladed tool or punch carefully remove the caliper pin boots from brake caliper bracket and discard. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
scientia non olet · About LEMON Manuals