Removal (Front)
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the brake caliper from the mounting bracket and support the brake caliper with heavy mechanic's wire, or equivalent; do NOT disconnect the hydraulic brake flexible hose from the caliper.
- Remove the brake pads from the brake caliper bracket. Remove the brake pad retainers from the brake caliper bracket.
- Remove the brake caliper bracket bolts. Remove the brake caliper bracket. Use a wire brush to clean any debris or rust from the brake caliper bracket.
- Inspect the brake mounting and hardware. Inspect the brake caliper bracket for cracks or damage. Replace the brake caliper bracket if cracked or damaged.