LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 517 (Fwd Axle Shafts) >> Overhaul >> Intermediate Shaft >> Reassembly >> Dust Seal (Left Side) Assembly Note

Dust Seal (Left Side) Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new dust seal (left side) using a steel plate and the Bearing Installer (49-W027-003) and Support Block (49-S231-626). See Fig 1 .
Fig 1: Assembling Dust Seal (Left Side)
G00356665Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals