LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Rear Suspension System) >> Removal & Installation >> Stabilizer Shaft >> Removal

Stabilizer Shaft: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the automatic level control height sensor link from the control arm. See Fig 1.
    • The stabilizer shaft link assembly bolt.
    • The nut.
    • The retainers.
    • The sleeve.
    • The insulators.
  3. Remover the clamp bolt. Bend the open end of the clamp upward.
  4. Remove the stabilizer shaft and the insulator.
Fig 1: Exploded View Of Stabilizer Shaft
G00056085Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals