Axle Shafts Boot Cover: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2002 GMC Yukon XL. However, it is still accessible from the selected car via links, so may be relevant.
- Use side cutters to cut the halfshaft seal cover clamps and the nylon strap. See Fig 1.
- Slide the halfshaft seal cover off of the halfshaft, over the CV joint end. Check the halfshaft seal cover for rips, tears, worn spots or other damage. Reuse the halfshaft seal cover if there is no damage visible.