Removal & Installation
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support the vehicle. Remove the vent hose clamp from the vent hose. Release the grommet securing the vent hose to the vehicle underbody. Remove the vent hose from the differential assembly vent tube by carefully twisting the hose. See Figure . Install the vent hose to the differential assembly. Install the vent hose clamp to the vent hose. Secure the grommet on the vent hose to the vehicle underbody. Lower the vehicle.