Differential Carrier Assembly Mount: Removal
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Support the front of the differential with a suitable stand. Loosen, but do not remove, the torque tube-to-bracket through bolt and nut. See Figure .
- Remove the cradle-to-differential mounting bolts, nuts, washers, and bushings from the differential. See Fig 1 . Raise the stand slightly in order to gain access to the differential-to-cradle bushings. Remove the differential-to-cradle bushings. See Fig 1 .