LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Disc Brakes) >> Removal & Installation >> Park Brake Release Handle Assembly >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the park brake release lever mounting bolt. See Fig 1.
  2. Remove the park brake release lever handle from the knee bolster.
  3. Disconnect the park brake release cable from the lever.
  4. Connect the park brake release cable to the lever.
  5. Install the park brake release lever handle to the knee bolster. See Fig 1.
  6. Install the park brake release lever mounting bolt. Tighten bolt to specification. See TORQUE SPECIFICATIONS .
Fig 1: Removing Park Brake Release Lever Mounting Bolt
G00317482Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals