Installation (Front)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cable. See Figure.
- Snap the retainer tabs into the body mount.
- Connect the front cable to the intermediate cable.
- Route the cable in through the floor pan and engage the grommet.
- Remove the safety stands.
- Lower the vehicle.
- Roll the carpet into place. See Figure.
- Install the park brake pedal. See PARK BRAKE PEDAL ASSEMBLY .
- Adjust the park brake system. See PARK BRAKE ADJUSTMENT under ADJUSTMENTS & INSPECTION.