Hydraulic Brake Booster: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the park brake and block the wheels.
- Disconnect the inlet hose, the steering gear, and the return hoses from the booster assembly.
- Remove the master cylinder. See MASTER CYLINDER .
- Remove the stoplight switch. See STOPLIGHT SWITCH .
- Remove the 4 booster to bulkhead nuts.
- Remove the booster assembly.
- Remove the gasket. See Fig 1.