LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Disc Brakes) >> Removal & Installation >> Front Disc Brake Splash Shield >> Installation

Front Disc Brake Splash Shield: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the splash shield. See Figure or Figure .
  2. Install the hub and bearing assembly. See WHEEL HUB & BEARINGS under REMOVAL & INSTALLATION in appropriate FRONT article in SUSPENSION.
  3. Install the tire and wheel assembly. Tighten to specification. See TORQUE SPECIFICATIONS .
  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals