Rear Disc Brake Backing Plate: Removal
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the tire and the wheel assembly.
- Remove the rear disc brake rotor. See BRAKE ROTOR .
- Remove the bolts securing the backing plate to the axle flange.
- Remove the backing plate.