LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Disc Brakes (Cab & Chassis, & Hd)) >> Removal & Installation >> Park Brake Release Handle Assembly >> Removal

Park Brake Release Handle Assembly: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake.
  2. Open the park brake cable retaining clip.
  3. Disconnect the release cable from the pedal assembly. See Figure .
  4. Remove the park brake cable grommet from the pedal assembly.
  5. Remove the release handle by depressing the clips on the sides of the handle stem.
  6. Twist the cable end and remove from the instrument panel.
scientia non olet · About LEMON Manuals